打印

用SCSI硬盘拷贝机备份SUN服务器硬盘后无法启动

小牛鼻子

临时用户组

社区积分: 0
技术积分: 7

大中小 1楼

2008-7-3 14:00 只看该作者

用SCSI硬盘拷贝机备份SUN服务器硬盘后无法启动

如题，我们购买了两块和SUN服务器同样的硬盘，并使用SCSI硬盘拷贝机备份了SUN服务器原来硬盘的数据，但是新硬盘插上去之后，服务器无法正常启动了，麻烦大家给分析一下原因，谢谢！

下面是我存下来的LOG：

Find dropin, Copying Done, Size 0000.0000.0000.6e70
PC = 0000.07ff.f000.5d68
PC = 0000.0000.0000.5e18
Find dropin, (copied), Decompressing Done, Size 0000.0000.0006.95c0
Diagnostic console initialized
System Reset: CPU Reset
Programming IMAX Probing system devices
jbus at 0,0 SUNW,UltraSPARC-IIIi (1503 MHz @ 9:1, 1 MB) memory-controller
jbus at 1,0 Nothing there
jbus at 1f,0 pci
jbus at 1e,0 pci
jbus at 1c,0 pci
jbus at 1d,0 pci
Loading Support Packages: kbd-translator obp-tftp SUNW,i2c-ram-device SUNW,fr
evice SUNW,asr
Loading onboard drivers:
/pci@1e,600000: Device 7 isa
/pci@1e,600000/isa@7: flashprom rtc i2c power serial serial serial rmc-comm
/pci@1e,600000/isa@7/i2c@0,320: i2c-bridge i2c-bridge motherboard-fru-prom ch
is-fru-prom alarm-fru-prom power-supply-fru-prom power-supply-fru-prom dimm-s
dimm-spd dimm-spd dimm-spd rscrtc nvram idprom gpio gpio gpio gpio gpio gpio
Probing memory
CPU 0 Bank 0 base       0 size 1024 MB
CPU 0 Bank 2 base  200000000 size 1024 MB
SUNW,Netra-240 Probing I/O buses
/pci@1d,700000: Device 2 network network
/pci@1f,700000: Device 2 network network
/pci@1e,600000: Device 6 pmu i2c gpio
/pci@1e,600000/pmu@6/i2c@0,0:
/pci@1e,600000: Device a usb
/pci@1e,600000: Device d ide disk cdrom
/pci@1e,600000: Device 2 Nothing there
/pci@1e,600000: Device 3 Nothing there
/pci@1c,600000: Device 2 scsi disk tape scsi disk tape
/pci@1c,600000: Device 1 Nothing there
/pci@1d,700000: Device 1 Nothing there

Netra 240, No Keyboard
Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.18.10, 2048 MB memory installed, Serial #72704093.
Ethernet address 0:14:4f:55:60:5d, Host ID: 8455605d.

Rebooting with command: boot
Boot device: disk  File and args:
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
Loading: /platform/SUNW,Netra-240/ufsboot
Loading: /platform/sun4u/ufsboot
SunOS Release 5.10 Version Generic_120011-14 64-bit
Copyright 1983-2007 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
os-io Cannot open mirrored root device, error 19
Cannot remount root on /pseudo/md@0:0,10,blk fstype ufs

panic[cpu0]/thread=180e000: vfs_mountroot: cannot remount root

000000000180b950 genunix:vfs_mountroot+354 (2021, 21, 60000840080, 1864510, 1
c00, 185efe8)
  %l0-3: 000000000185ec00 0000000000000001 0000000000008025 0000000001204000
  %l4-7: 0000000001889a20 000000000185eda0 0000000001889a20 0000000001889a20
000000000180ba10 genunix:main+98 (1814308, 1014c00, 18365b0, 18b0800, 7000200
1814000)
  %l0-3: 0000000070002000 0000000000000001 000000000180c000 000000000180e000
  %l4-7: 0000000000000001 000000000180c000 0000000000000060 0000000000000000

syncing file systems... done
skipping system dump - no dump device configured
rebooting...

@(#)OBP 4.18.10 2006/03/03 13:59 Sun Fire V210/V240,Netra 210/240
Clearing TLBs
Loading Configuration

Membase: 0000.0002.0000.0000
MemSize: 0000.0000.4000.0000
Init CPU arrays Done
Init E$ tags Done
Setup TLB Done
MMUs ON
Scrubbing Tomatillo tags... 0 1
Block Scrubbing Done
Find dropin, Copying Done, Size 0000.0000.0000.6e70
PC = 0000.07ff.f000.5d68
PC = 0000.0000.0000.5e18
Find dropin, (copied), Decompressing Done, Size 0000.0000.0006.95c0
Diagnostic console initialized
System Reset: CPU Reset
Programming IMAX Probing system devices
jbus at 0,0 SUNW,UltraSPARC-IIIi (1503 MHz @ 9:1, 1 MB) memory-controller
jbus at 1,0 Nothing there
jbus at 1f,0 pci
jbus at 1e,0 pci
jbus at 1c,0 pci
jbus at 1d,0 pci
Loading Support Packages: kbd-translator obp-tftp SUNW,i2c-ram-device SUNW,fr
evice SUNW,asr
Loading onboard drivers:
/pci@1e,600000: Device 7 isa
/pci@1e,600000/isa@7: flashprom rtc i2c power serial serial serial rmc-comm
/pci@1e,600000/isa@7/i2c@0,320: i2c-bridge i2c-bridge motherboard-fru-prom ch
is-fru-prom alarm-fru-prom power-supply-fru-prom power-supply-fru-prom dimm-s
dimm-spd dimm-spd dimm-spd rscrtc nvram idprom gpio gpio gpio gpio gpio gpio
Probing memory
CPU 0 Bank 0 base       0 size 1024 MB
CPU 0 Bank 2 base  200000000 size 1024 MB
SUNW,Netra-240 Probing I/O buses
/pci@1d,700000: Device 2 network network
/pci@1f,700000: Device 2 network network
/pci@1e,600000: Device 6 pmu i2c gpio
/pci@1e,600000/pmu@6/i2c@0,0:
/pci@1e,600000: Device a usb
/pci@1e,600000: Device d ide disk cdrom
/pci@1e,600000: Device 2 Nothing there
/pci@1e,600000: Device 3 Nothing there
/pci@1c,600000: Device 2 scsi disk tape scsi disk tape
/pci@1c,600000: Device 1 Nothing there
/pci@1d,700000: Device 1 Nothing there

Netra 240, No Keyboard
Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.18.10, 2048 MB memory installed, Serial #72704093.
Ethernet address 0:14:4f:55:60:5d, Host ID: 8455605d.

Rebooting with command: boot
Boot device: disk  File and args:
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
Loading: /platform/SUNW,Netra-240/ufsboot
Loading: /platform/sun4u/ufsboot
SunOS Release 5.10 Version Generic_120011-14 64-bit
Copyright 1983-2007 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
os-io Cannot open mirrored root device, error 19
Cannot remount root on /pseudo/md@0:0,10,blk fstype ufs

panic[cpu0]/thread=180e000: vfs_mountroot: cannot remount root

000000000180b950 genunix:vfs_mountroot+354 (2021, 21, 60000840080, 1864510, 1
c00, 185efe8)
  %l0-3: 000000000185ec00 0000000000000001 0000000000008025 0000000001204000
  %l4-7: 0000000001889a20 000000000185eda0 0000000001889a20 0000000001889a20
000000000180ba10 genunix:main+98 (1814308, 1014c00, 18365b0, 18b0800, 7000200
1814000)
  %l0-3: 0000000070002000 0000000000000001 000000000180c000 000000000180e000
  %l4-7: 0000000000000001 000000000180c000 0000000000000060 0000000000000000

syncing file systems... done
skipping system dump - no dump device configured
rebooting...

@(#)OBP 4.18.10 2006/03/03 13:59 Sun Fire V210/V240,Netra 210/240
Clearing TLBs
Loading Configuration

Membase: 0000.0002.0000.0000
MemSize: 0000.0000.4000.0000
Init CPU arrays Done
Init E$ tags Done
Setup TLB Done
MMUs ON
Scrubbing Tomatillo tags... 0 1
Block Scrubbing Done
Find dropin, Copying Done, Size 0000.0000.0000.6e70
PC = 0000.07ff.f000.5d68
PC = 0000.0000.0000.5e18
Find dropin, (copied), Decompressing Done, Size 0000.0000.0006.95c0
Diagnostic console initialized
System Reset: CPU Reset
Programming IMAX Probing system devices
jbus at 0,0 SUNW,UltraSPARC-IIIi (1503 MHz @ 9:1, 1 MB) memory-controller
jbus at 1,0 Nothing there
jbus at 1f,0 pci
jbus at 1e,0 pci
jbus at 1c,0 pci
jbus at 1d,0 pci
Loading Support Packages: kbd-translator obp-tftp SUNW,i2c-ram-device SUNW,fr
evice SUNW,asr
Loading onboard drivers:
/pci@1e,600000: Device 7 isa
/pci@1e,600000/isa@7: flashprom rtc i2c power serial serial serial rmc-comm
/pci@1e,600000/isa@7/i2c@0,320: i2c-bridge i2c-bridge motherboard-fru-prom ch
is-fru-prom alarm-fru-prom power-supply-fru-prom power-supply-fru-prom dimm-s
dimm-spd dimm-spd dimm-spd rscrtc nvram idprom gpio gpio gpio gpio gpio gpio
Probing memory
CPU 0 Bank 0 base       0 size 1024 MB
CPU 0 Bank 2 base  200000000 size 1024 MB
SUNW,Netra-240 Probing I/O buses
/pci@1d,700000: Device 2 network network
/pci@1f,700000: Device 2 network network
/pci@1e,600000: Device 6 pmu i2c gpio
/pci@1e,600000/pmu@6/i2c@0,0:
/pci@1e,600000: Device a usb
/pci@1e,600000: Device d ide disk cdrom
/pci@1e,600000: Device 2 Nothing there
/pci@1e,600000: Device 3 Nothing there
/pci@1c,600000: Device 2 scsi disk tape scsi disk tape
/pci@1c,600000: Device 1 Nothing there
/pci@1d,700000: Device 1 Nothing there

Netra 240, No Keyboard
Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.18.10, 2048 MB memory installed, Serial #72704093.
Ethernet address 0:14:4f:55:60:5d, Host ID: 8455605d.

Rebooting with command: boot
Boot device: disk  File and args:
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
Loading: /platform/SUNW,Netra-240/ufsboot
Loading: /platform/sun4u/ufsboot
SunOS Release 5.10 Version Generic_120011-14 64-bit
Copyright 1983-2007 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
os-io Cannot open mirrored root device, error 19
Cannot remount root on /pseudo/md@0:0,10,blk fstype ufs

panic[cpu0]/thread=180e000: vfs_mountroot: cannot remount root

000000000180b950 genunix:vfs_mountroot+354 (2021, 21, 60000840080, 1864510, 1
c00, 185efe8)
  %l0-3: 000000000185ec00 0000000000000001 0000000000008025 0000000001204000
  %l4-7: 0000000001889a20 000000000185eda0 0000000001889a20 0000000001889a20
000000000180ba10 genunix:main+98 (1814308, 1014c00, 18365b0, 18b0800, 7000200
1814000)
  %l0-3: 0000000070002000 0000000000000001 000000000180c000 000000000180e000
  %l4-7: 0000000000000001 000000000180c000 0000000000000060 0000000000000000

syncing file systems... done
skipping system dump - no dump device configured
rebooting...

@(#)OBP 4.18.10 2006/03/03 13:59 Sun Fire V210/V240,Netra 210/240
Clearing TLBs
Loading Configuration

Membase: 0000.0002.0000.0000
MemSize: 0000.0000.4000.0000
Init CPU arrays Done
Init E$ tags Done
Setup TLB Done
MMUs ON
Scrubbing Tomatillo tags... 0 1
Block Scrubbing Done
Find dropin, Copying Done, Size 0000.0000.0000.6e70
PC = 0000.07ff.f000.5d68
PC = 0000.0000.0000.5e18
Find dropin, (copied), Decompressing Done, Size 0000.0000.0006.95c0
Diagnostic console initialized
System Reset: CPU Reset
Programming IMAX Probing system devices
jbus at 0,0 SUNW,UltraSPARC-IIIi (1503 MHz @ 9:1, 1 MB) memory-controller
jbus at 1,0 Nothing there
jbus at 1f,0 pci
jbus at 1e,0 pci
jbus at 1c,0 pci
jbus at 1d,0 pci
Loading Support Packages: kbd-translator obp-tftp SUNW,i2c-ram-device SUNW,fr
evice SUNW,asr
Loading onboard drivers:
/pci@1e,600000: Device 7 isa
/pci@1e,600000/isa@7: flashprom rtc i2c power serial serial serial rmc-comm
/pci@1e,600000/isa@7/i2c@0,320: i2c-bridge i2c-bridge motherboard-fru-prom ch
is-fru-prom alarm-fru-prom power-supply-fru-prom power-supply-fru-prom dimm-s
dimm-spd dimm-spd dimm-spd rscrtc nvram idprom gpio gpio gpio gpio gpio gpio
Probing memory
CPU 0 Bank 0 base       0 size 1024 MB
CPU 0 Bank 2 base  200000000 size 1024 MB
SUNW,Netra-240 Probing I/O buses
/pci@1d,700000: Device 2 network network
/pci@1f,700000: Device 2 network network
/pci@1e,600000: Device 6 pmu i2c gpio
/pci@1e,600000/pmu@6/i2c@0,0:
/pci@1e,600000: Device a usb
/pci@1e,600000: Device d ide disk cdrom
/pci@1e,600000: Device 2 Nothing there
/pci@1e,600000: Device 3 Nothing there
/pci@1c,600000: Device 2 scsi disk tape scsi disk tape
/pci@1c,600000: Device 1 Nothing there
/pci@1d,700000: Device 1 Nothing there

Netra 240, No Keyboard
Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.18.10, 2048 MB memory installed, Serial #72704093.
Ethernet address 0:14:4f:55:60:5d, Host ID: 8455605d.

Rebooting with command: boot
Boot device: disk  File and args:
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
Loading: /platform/SUNW,Netra-240/ufsboot
Loading: /platform/sun4u/ufsboot
zc01-alom>

[ 本帖最后由小牛鼻子于 2008-7-3 14:02 编辑 ]

TOP

云杉上的蝴蝶

IX新闻中心海观理事--海外观察家

监管小组

Rank: 16

社区积分: 7231
技术积分: 6593

论坛徽章 19

获赠礼品

大中小 2楼

2008-7-3 18:27 只看该作者

修复GRUB试试！

|-- AI by Spruce Lab -- | Discover the Info. Tech. for Personal! && Powered by Solaris & Oracle

TOP

lanyun001

初级会员

二星会员

Rank: 3 Rank: 3

社区积分: 39
技术积分: 509

获赠礼品

大中小 3楼

2008-7-4 09:18 只看该作者

很有可能是grub的问题，

http://hi.baidu.com/lanyun001/

TOP

小牛鼻子

临时用户组

社区积分: 0
技术积分: 7

大中小 4楼

2008-7-4 17:00 只看该作者

怎么修复GRUB?

麻烦给一个修复GRUB的流程，谢谢！

TOP

云杉上的蝴蝶

IX新闻中心海观理事--海外观察家

监管小组

Rank: 16

社区积分: 7231
技术积分: 6593

论坛徽章 19

获赠礼品

大中小 5楼

2008-7-4 18:48 只看该作者

或者启动到单用户
重设下启动盘
disk

man fdisk
......
Change Active (Boot from) partition

      This option allows the user  to  specify  the  partition
      where  the  first-stage  bootstrap  will  look  for  the
      second-stage bootstrap, otherwise known  as  the  active
      partition.

|-- AI by Spruce Lab -- | Discover the Info. Tech. for Personal! && Powered by Solaris & Oracle

TOP

anhuachina

初级会员

临时用户组

社区积分: 0
技术积分: 18

大中小 6楼

2008-7-6 09:21 只看该作者

关于SCSI硬盘拷贝机

我不知道楼主使用的是那一款SCSI硬盘拷贝机，通常用硬盘拷贝机复制的系统盘，是可以直接启动;；我知道市场上有一款便易的IDE/SCSI通用的硬盘拷贝机，有时对SCSI硬盘支持不好，特别是80针硬盘；请使用美国产的SCSI硬盘拷贝机，如果你在北京，可以用我们经销的SCSI硬盘复制机试试：
http://www.fuzhiji.com

选一款好的SCSI硬盘复制机，很重要！

TOP