一直想学AIX  5L系统，可没有真实的环境，所以用模拟器
我在LINUX AS3 UPDATE 6 ，为安装避免出现缺少LINUX包，所以我安装了所有的包
make toolchain_all编译都没有问题，但在make kernel_all出现了问题，不知道是哪里出了问题，从出错信息来是git包报错，这个包我都
已经在不同的网站上下载了五次，问题依就

[ 本帖最后由 ochef 于 2008-5-26 08:23 编辑 ]

aix 有模拟器了?
好象没吧.

你在網上搜一下知道了

引用:

老农
胡说呢，呵呵。
这是POWER970的模拟器，不是AIX的模拟器。

它只能在上面装POWER版的LINUX，编译执行POWER970支持的程序。

引用:

原帖由 sasser 于 2008-5-27 15:40 发表

根據官方的安裝文檔說明是可以安裝在X86的機器上的,請高手明示，謝謝！

Obtaining Installation Media for Your System
Installation media for the IBM Full-System Simulator for PowerPC 970 is available from the IBM alphaWorks
Emerging Technologies web site for the following Linux platforms:
Creating and Installing the IBM Full-System Simulator Environment
To run the simulator, complete the following series of procedures to build a PowerPC toolchain, a 64-bit PowerPC Linux
kernel, and a 64-bit PowerPC rootdisk. Once built, the IBM Full-System Simulator provides a complete simulation
environment that includes all available data collection and visualization tools, Tcl commands, and call-thru interfaces.
“Troubleshooting Your Installation” on page 7 describes information about installation issues that you may encounter.
􀀛 DOWNLOAD AND EXTRACT SIMULATOR BINARY FILES
1. Download the IBM_SystemSim_alphaworks_sdk_x_y_.tar.bz2 package from the IBM alphaWorks
Emerging Technologies web site, as outlined in the previous “Obtaining Installation Media for Your System”
section. To determine the version of Linux that is installed on your system, type the following rpm command at the
command line:
rpm -qa | grep release
2. Extract files from the package; the following sample tar command extracts the base installation files:
tar xjf {installation_directory}/IBM_SystemSim_alphaworks_sdk_x.tar.bz2
where {installation_directory} is the directory that contains the installation tar file, and x is the current version of
the binary. The tar command extracts files in the package into the ibmsim directory.
Table 1-1. Installation Matrix for Host Systems
Installation Packagea
a. Package names follow the naming convention: IBM_SystemSim_alphaworks_sdk_x_y_z_.tar.bz2, where x specifies the host platform, y
specifies the host Linux version, and z is the most current version of the binary that is available from the IBM alphaWorks Emerging
Technologies web site.
Host Platform File Size
SystemSim_x86_rh8_2.0.tar.bz2 Supported on RedHat Linux v8.0 and RedHat Linux v9.0b running on
an x86 machine.b. Installing IBM_SystemSim_alphaworks_sdk_x86_rh8_y_.tar.bz2 on RedHat Linux v9.0 may require you to create symbolic links to point
the Linux libraries to the files in the simulator. The “Troubleshooting Your Installation” on page 7 describes steps to resolve this issue.
7.9 MB
SystemSim_x86_rhel3_2.0.tar.bz2 Supported on RedHat Enterprise Linux v3, Fedora Core 2, and
Fedora Core 3 running on an x86 machine.7.7 MB
SystemSim_x86_fc4_2.0.tar.bz2 Supported on Fedora Core 4 running on an x86 machine. 7.7 MB
SystemSim_ppc_sles9_2.0.tar.bz2 Supported on SUSE LINUX Enterprise Server 9 running on a
PowerPC machine.
7.7 MB
SystemSim_ppc_fc4_2.0.tar.bz2 Supported on Fedora Core 4 running on a PowerPC machine. 7.8 MB

[ 本帖最后由 ochef 于 2008-5-30 08:32 编辑 ]

make toolchain_all
这个在哪里敲？
完全不明白

我以前试过，它提供的是一个程序开发环境，而不是操作系统运行环境，也就是即使你安装成功，你仍然缺少：
１．仿真的ｂｉｏｓ提供ｂｏｏｔｌｏａｄ功能，引导ａｉｘ
２．设备驱动或者仿真标准设备以支持ａｉｘ装载运行
３．效率。这种软仿真与ｖｍｗａｒｅ的方式不同，连代码都是解释执行的，效率相当于前２代甚至３代ｃｐｕ

目前１８ｍ尚无计划提供ｘ８６上ａｉｘ，但反过来，有可能在ａｉｘ里面可以开ｌｉｎｕｘ分区

太谢谢了，终于可以提高了。