LAP1242AG-C-K9和NM-AIR-WLC6的配置问题
我的WLC6装在2811上面
iso是c2800nm-advipservicesk9-mz.124-11.T1.bin
下面是2811的配置
文件
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname C2811
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
!
!
ip cef
no ip dhcp use vrf connected
!
ip dhcp pool AP
network 192.168.100.0 255.255.255.0
default-router 192.168.100.1
option 43 ascii "192.168.99.24"
!
!
ip domain name yourdomain.com
!
multilink bundle-name authenticated
!
!
voice-card 0
no dspfarm
!
!
username cisco privilege 15 secret 5 $1$NJ4h$P5KepFKEUWR/9Qw6CepR./
!
interface FastEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE 0/0$
ip address 192.168.100.1 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 10.0.100.254 255.255.255.0
ip virtual-reassembly
duplex auto
speed auto
!
interface Serial0/2/0
no ip address
shutdown
clock rate 125000
!
interface Serial0/2/1
no ip address
shutdown
clock rate 125000
!
interface wlan-controller1/0
ip address 192.168.99.254 255.255.255.0
!
ip route 0.0.0.0 0.0.0.0 10.0.100.1
!
wlc的management ip 是192.168.99.24
故障现象：ap可以发现WLC，也可以从那里
下载ios，但是
下载完成后，重新启动在WLC上面show ap sum就是看不到这个AP
AP的输出如下：
*Mar 1 00:03:17.678: LWAPP_CLIENT_ERROR_DEBUG: spamHandleDiscoveryTimer : Found the discovery response from MASTER Mwar
examining image...
Loading file /c1240...
!
extracting info (286 bytes)
Image info:
Version Suffix: k9w8-.123-7.JX4
Image Name: c1240-k9w8-mx.123-7.JX4
Version Directory: c1240-k9w8-mx.123-7.JX4
Ios Image Size: 2437632
Total Image Size: 2437632
Image Feature: WIRELESS LAN|LWAPP
Image Family: C1240
Wireless Switch Management Version: 3.2.150.6
Extracting files...
c1240-k9w8-mx.123-7.JX4/ (directory) 0 (bytes)
extracting c1240-k9w8-mx.123-7.JX4/info (286 bytes)
extracting c1240-k9w8-mx.123-7.JX4/6701.img
*Mar 1 00:03:17.687: %LWAPP-5-CHANGED: LWAPP changed state to(131328 bytes)!! JOIN
*Jan 8 15:17:21.139: %LWAPP-5-CHANGED: LWAPP changed state to IMAGE!!!!!!!!!!!
extracting c1240-k9w8-mx.123-7.JX4/c1240-k9w8-mx.123-7.JX4 (2162725 bytes)!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
extracting c1240-k9w8-mx.123-7.JX4/7101.img (131328 bytes)!!!!!!!!!!!!!
extracting info.ver (286 bytes)!
Deleting existing version...
Deleting flash:/c1240-k9w8-mx.123-7.JX4...
done.
New software image installed in flash:/c1240-k9w8-mx.123-7.JX4
Configuring system to use new image...done.archive download: takes 38 seconds
*Jan 8 15:17:59.932: image upgrade successfully, system is now reloading
*Jan 8 15:17:59.975: %SYS-5-RELOAD: Reload requested by lwapp image download proc. Reload Reason: NEW IMAGE DOWNLOAD.
*Jan 8 15:17:59.975: %LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is available.
flashfs[0]: 7 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 4295168
flashfs[0]: Bytes available: 11703808
flashfs[0]: flashfs fsck took 25 seconds.
Base ethernet MAC Address: 00:1b:53:95:19:da
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
Loading "flash:/c1240-k9w8-mx.123-7.JX4/c1240-k9w8-mx.123-7.JX4"...###################################################################################################################################################################################################################################
File "flash:/c1240-k9w8-mx.123-7.JX4/c1240-k9w8-mx.123-7.JX4" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.3(7)JX4, RELEASE SOFTWARE (fc1)
Technical Support:
http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Wed 31-May-06 12:01 by evmiller
Image text-base: 0x00003000, data-base: 0x00403A00
Initializing flashfs...
flashfs[1]: 7 files, 3 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 4295168
flashfs[1]: Bytes available: 11703808
flashfs[1]: flashfs fsck took 3 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
cisco AIR-LAP1242AG-C-K9 (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FOC111513YK
PowerPCElvis CPU at 266Mhz, revision number 0x0950
Last reset from power-on
1 FastEthernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:1B:53:95:19:DA
Part Number : 73-10256-06
PCA Assembly Number : 800-26918-05
PCA Revision Number : A0
PCB Serial Number : FOC111513YK
Top Assembly Part Number : 800-29152-02
Top Assembly Serial Number : FOC111513YK
Top Revision Number : A0
Product/Model Number : AIR-LAP1242AG-C-K9
Press RETURN to get started!
*Mar 1 00:00:04.802: soap_prepare_new_image_crash: mini ios flash:/c1240-rcvk9w8-mx/c1240-rcvk9w8-mx
*Mar 1 00:00:04.803: set boothlpr to mini ios
*Mar 1 00:00:05.103: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:06.561: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:06.917: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:08.054: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: R
ap>
ap>ADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar 1 00:00:09.099: %SYS-6-LOGGERSTART: Logger process started
*Mar 1 00:00:09.121: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.3(7)JX4, RELEASE SOFTWARE (fc1)
Technical Support:
http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Wed 31-May-06 12:01 by evmiller
*Mar 1 00:00:09.128: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source
*Mar 1 00:00:09.156: %DOT11-6-FREQ_SCAN: Interface Dot11Radio1, Scanning frequencies for 9 seconds
*Mar 1 00:00:09.184: %DOT11-6-FREQ_SCAN: Interface Dot11Radio0, Scanning frequencies for 19 seconds
*Mar 1 00:00:10.091: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:10.123: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:00:10.124: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:11.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar 1 00:00:17.940: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5805 selected
*Mar 1 00:00:17.942: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:18.942: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:00:28.140: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar 1 00:00:28.154: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:28.162: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2462 selected
*Mar 1 00:00:28.166: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:28.166: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:28.190: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:28.258: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:28.259: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:28.377: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:29.259: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:00:38.608: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2417 selected
*Mar 1 00:00:38.615: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5765 selected
*Mar 1 00:00:48.624: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2422 selected
*Mar 1 00:00:48.630: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5785 selected
这句：*Mar 1 00:00:28.140: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY应该是关键，但是我一直找不到问题所在。
不知道大家有没用碰到过类似问题？或者那位兄弟成功配置过的，能不能共享一下配置文件。
Powered by IXPUB.Net © 2001-2007 All Right Reserved. 
